KEMING Series Manual Grouting Pump

KEMING Series Manual Grouting Pump

• Introduction

Manual pump is mainly used for delivery or pressure grout of cement slurry and other fluids like cement.

• Technical parameters

Model	KB Manual Pump
Capacity	0~8 L/min
Max. Pressure	1MPa
Cylinder Dia.	110mm
Piston Stroke	42mm
Inlet Dia.	25mm
Outlet Dia.	25mm
Weight	40kg
Dimensions (LxWxH)	980x290x590mm (customer require)

• Operation

Connect the suction pipe( the length is less than 3m) and discharge pipe, and insert the suction pipe into material hopper.

Shake rocker manually. The slurry will be sucked in and discharged continuously under the reciprocating motion of piston.

• Maintenance

Clean the pump and pipes with clean water after each work shift, as follows:

1. Insert the suction pipe into clean water, and shake rocker manually until the clean water is out from discharge pipe;
2. Stir the steel ball inside suction inlet with steel wire to exhaust the residual water in piston chamber from suction inlet;
3. Tip the pump at an angle of 90 degree to exhaust the residual water in upper cavity of steel ball from discharge outlet.

Manual pump

Ref:
1.KB Manual Pump
2. Main Products: shotcrete machine / gunite machine, concrete pump, grouting
pump, plaster machine, concrete mixing machine, concrete foaming machine, etc.